Count the number of individual pieces of equipment based on your design. Enter the numbers into their respective fields in the Installation and Commissioning QC Pack Calculator. The total number will be totalized. This would represent the total number of QC Packs to be generated, based on your design.

The Installation and Commissioning QC Pack Calculator would specify the package size that is best suited based on your design.

This allows for economy of scale. The greater the number of Installation and Commissioning QC Packs to be produced, the lower the per-unit cost.

Each type of Installation and Commissioning QC Pack is dedicated to the following categories:

1. Racking

1.1. Each type of Racking QC Pack is dedicated to either;

1.1.1. Racking

1.1.2. Ducts

1.1.3. Trenches

1.1.4. Sleeves.

2. Electrical

2.1. Each type of Electrical QC Pack is dedicated to either;

2.1.1. MV Switch Gear

2.1.2. MCC's

2.1.3. Transformers

2.1.4. MCC Network

2.1.5. Generators

2.1.6. RMU's

2.1.7. BTU's

2.1.8. PFC's

2.1.9. DB Panels

2.1.10. Other Panels

2.1.11. UPS's

2.1.12. Mini-Subs

2.1.13. Earthing & Lightning

2.1.14. Outlets

2.1.15. Lighting

2.1.16. Drives

3. Instrumentation

3.1. Each type of Instrumentation QC Pack is dedicated to either;

3.1.1. Control Room

3.1.2. Standard Panels

3.1.3. IO Panels

3.1.4. IPDB Panels

3.1.5. Network

3.1.6. Instrumentation

3.1.7. Control Valves.

When you see "■" in the package deliverables list, you know what makes up the full QC Pack. See the different service offerings.

The duration depends on the package size your project requires. The durations vary between 4 and 10 working days after the preparation work has been done.

We would save you time and improve the consistency and reliability of your QC Packs.

Traditionally you would create your QC Packs in parallel with construction. This normally leads to working late nights, causing late sign-offs and handovers.

See the comparison section for more detail.

1. Book your FREE Consultation Session during which we would follow steps 3 to 8.

- OR -

2. You can follow steps 3 to 8 yourself.

3. Create a client account by clicking the "Login" link.

4. You will then be taken to a client area.

5. In the client area, you need to create a Project Profile.

6. You will then need to complete a Racking QC Pack calculation form to determine the package size.

7. That will generate a proposal.

8. On acceptance, the order form will open for payment.